China wholesaler Table Lifting Bolt Model Flat Head Thread Jack Worm Gear Screw Mechanical Jack Screw Flange Jack with Motor

Product Description

 

Top Quality Worm Gear Screw Jacks Load Up to 200 Ton

Machine& Ball Screw Jack Actuators

Features:

1. Suitable for heavy load, low speed and low frequency; 2. Main components: precision trapezoid screw pair and high precision worm gear pair; 3. Compact design, small volume, light weight, wide drive sources, low noise, easy operation, convenient maintenance. 4. The trapezoid screw has self-locking function, it can hold up load without braking device when screw stops traveling. 5. The lifting height can be adjusted according to customer requirements. 6. Widely applied in industries such as machinery, metellurgy, construction and hydraulic equipment. 7. Top End: top plate, clevis end, threaded end, plain end

How to choose a suitable model?

Some questions can help you to choose.

Q1:Do you need screw jack of ball screw or trapezoidal screw?

Q2: How many Kg or Tons the screw jack need to lift or drop? The screw shaft length? How fast the lifting speed is ? Q3:Which the screw top?you need,as picture above?

Q4:Manual type (Hand wheel?driven) or electric motor driven type or both driven type?

 

Q5:Traveling screw (screw travelling up and down when working) or traveling nut ? (the nut travelling up and down when working),Upright or?Inverted?

Product Parameters

Type

Model

Screw thread size

Max
lifting strength
kN

Max
pull force
kN

Weight without stroke
kg

Screw weight
per 100mm

SWL

Screw jack

SWL2.5

Tr30*6

25

25

7.3

0.45

SWL5

Tr40*7

50

50

16.2

0.82

SWL10/15

Tr58*12

100/150

99

25

1.67

SWL20

Tr65*12

200

166

36

2.15

SWL25

Tr90*16

250

250

70.5

4.15

SWL35

Tr100*18

350

350

87

5.20

SWL50

Tr120*20

500

500

420

7.45

SWL100

Tr160*23

1000

1000

1571

13.6

SWL120

Tr180*25

1200

1200

1350

17.3

1.Compact structure,Small size.Easy mounting,varied types.  Can be applied in 1 unit or multiple units.

2.High reliability.Long service life; With the function of   ascending,descending,thrusting,overturning

3.Wide motivity.It can be drived by  electrical motor and manual force.

4.It is usually used in low speed situation,widely used in the fields of
metallurgy,mechanical,construction,chemical,irrigation works,mediat treatment.

Detailed Photos

 

1. screw rod

2. nut bolt

3. cover

4.Skeleton oil seal

5.Bearing

6.Worm gear

7.Oil filling hole

8.Case

9.Skeleton oil seal

10.Cover

11. nut bolt

12.Bearing

13.Skeleton oil seal

14.Bearing

15.worm

16.Flat key

17.Bearing

18.Skeleton oil seal

19.Cover

20.Nut bolt

Product Description

 

Company Profile

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard or Nonstandard: Nonstandard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Power Transmission
Customized Support: OEM, ODM, Obm
Brand Name: Beiji or Customized
Certificate: ISO9001:2008
Structures: Worm Gear and Worm
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Can you explain the role of a worm wheel in conjunction with a worm gear?

In mechanical systems, a worm wheel and a worm gear work together to achieve the transmission of motion and power between two perpendicular shafts. The worm gear is a screw-like gear, while the worm wheel is a circular gear with teeth cut in a helical pattern. Here’s a detailed explanation of the role of a worm wheel in conjunction with a worm gear:

The primary function of a worm wheel and worm gear combination is to provide a compact and efficient means of transmitting rotational motion and power at a right angle. The interaction between the worm gear and the worm allows for high gear reduction ratios, making it suitable for applications that require large speed reductions and high torque output.

The worm gear, or worm, is a threaded shaft resembling a screw. It is the driving component of the system and is typically turned by a motor or other power source. The threads on the worm engage with the teeth of the worm wheel, causing the wheel to rotate.

The helical shape of the worm gear teeth and the orientation of the threads on the worm are designed to ensure smooth and efficient power transmission. As the worm rotates, the sliding action between the threads of the worm and the helical teeth of the worm wheel enables the transfer of motion.

The gear ratio between the worm and worm wheel determines the speed reduction and torque multiplication achieved. The number of teeth on the worm wheel compared to the number of threads on the worm determines the gear ratio. For example, a worm wheel with 40 teeth and a worm with one thread would result in a gear ratio of 40:1, meaning the output shaft of the worm wheel rotates once for every 40 rotations of the worm.

The key role of the worm wheel is to receive the rotational motion from the worm and transmit it to the output shaft. It converts the rotary motion of the worm into rotary motion in a different direction, typically at a right angle.

The worm wheel also provides mechanical advantage by multiplying the torque output. Due to the helical shape of the teeth, the sliding action between the worm and the worm wheel allows for a larger contact area and load distribution, resulting in increased torque output at the output shaft.

The combination of the worm gear and worm wheel offers several advantages in mechanical systems:

  • High Gear Reduction: The worm gear and worm wheel enable significant speed reduction while increasing torque output, making them suitable for applications requiring high torque and low speed.
  • Self-Locking: The friction between the worm gear and the worm prevents backdriving, allowing the worm wheel to maintain its position even when the driving force is removed.
  • Compact Design: The perpendicular arrangement of the worm gear and worm wheel allows for a compact and space-saving design, making it advantageous in applications with limited space.
  • Quiet Operation: The sliding action between the worm gear and worm wheel helps distribute the load over multiple teeth, resulting in smoother and quieter operation.
  • Directional Control: The worm gear and worm wheel combination can provide unidirectional motion, preventing motion from the output side back to the input side due to their self-locking property.

Worm gear and worm wheel systems are commonly used in various applications, including automotive, industrial machinery, elevators, conveyor systems, and robotics. Their unique characteristics make them suitable for tasks that require precise control, high torque, and compact design.

It is important to note that proper lubrication, maintenance, and design considerations are crucial for ensuring the reliable and efficient operation of worm gear and worm wheel systems. Regular inspections and adherence to manufacturer guidelines are essential for maximizing the lifespan and performance of these components.

How does the design of worm wheels impact their performance in different environments?

The design of worm wheels plays a significant role in determining their performance in different environments. Here’s a detailed explanation of how the design of worm wheels impacts their performance:

  • Tooth Profile: The tooth profile of a worm wheel can significantly affect its performance. Different tooth profiles, such as involute, cycloidal, or modified profiles, offer varying characteristics in terms of contact area, load distribution, and efficiency. The selection of the appropriate tooth profile depends on factors such as the application requirements, load capacity, and desired efficiency. For example, in applications where high load capacity is crucial, a modified tooth profile may be preferred to enhance the gear’s strength and durability.
  • Material Selection: The choice of material for worm wheels is crucial for their performance in different environments. Worm wheels can be made from various materials, including steel, bronze, brass, or specialized alloys. Each material offers different properties such as strength, wear resistance, corrosion resistance, and self-lubrication. The selection of the appropriate material depends on factors such as the operating conditions, anticipated loads, and environmental factors. For example, in applications where corrosion resistance is essential, a stainless steel or corrosion-resistant alloy may be chosen to ensure long-term performance in harsh environments.
  • Lubrication and Sealing: Proper lubrication and sealing are vital for the performance of worm wheels, especially in challenging environments. The design of worm wheels should consider factors such as lubrication requirements, sealing mechanisms, and the ability to prevent contamination ingress. Lubrication ensures smooth operation, reduces friction, and minimizes wear between the worm gear and the worm wheel. Effective sealing prevents the entry of contaminants such as dust, dirt, or moisture, which can adversely affect the gear’s performance and lifespan. The design should incorporate appropriate lubrication and sealing provisions based on the specific environmental conditions.
  • Heat Dissipation: In environments where high temperatures are present, the design of worm wheels should consider heat dissipation mechanisms. Excessive heat can lead to premature wear, reduced efficiency, and potential damage to the gear system. The design may include features such as cooling fins, heat sinks, or ventilation channels to facilitate heat dissipation and maintain optimal operating temperatures. Proper heat dissipation design ensures the longevity and reliability of worm wheels in high-temperature environments.
  • Noise and Vibration Control: The design of worm wheels can incorporate features to control noise and vibration, which are particularly important in certain environments. Modifications to the tooth profile, manufacturing tolerances, or the addition of damping elements can help reduce noise and vibration generation. In noise-sensitive environments or applications where excessive vibration can affect precision or stability, the design should prioritize noise and vibration control measures to ensure smooth and quiet operation.
  • Environmental Factors: The design of worm wheels should consider specific environmental factors that can impact their performance. These factors may include temperature extremes, humidity, corrosive substances, abrasive particles, or even exposure to outdoor elements. The design may incorporate protective coatings, specialized materials, or enhanced sealing mechanisms to mitigate the effects of these environmental factors. Considering and addressing the specific environmental challenges helps ensure optimal performance and longevity of worm wheels in different environments.

By carefully considering the design aspects mentioned above, worm wheels can be tailored to perform reliably and efficiently in different environments. The design choices made for tooth profile, material selection, lubrication, heat dissipation, noise and vibration control, and addressing environmental factors are essential for optimizing the performance and durability of worm wheels in their intended applications.

How do electronic or computer-controlled components integrate with worm wheels in modern applications?

In modern applications, electronic or computer-controlled components play a vital role in integrating with worm wheels. Here’s a detailed explanation of how these components integrate:

  • Sensor Feedback: Electronic sensors can be integrated with worm wheels to provide feedback on various parameters such as position, speed, torque, and temperature. These sensors can detect the rotational position of the worm wheel, monitor the speed of rotation, measure the torque applied, and monitor the temperature of the system. The sensor data can be processed by a computer-controlled system to optimize performance, ensure safety, and enable precise control of the worm wheel system.
  • Control Algorithms: Computer-controlled components allow for precise control algorithms to be implemented in worm wheel systems. These algorithms can optimize the operation of the worm wheel by adjusting parameters such as speed, torque, or position based on real-time sensor feedback. By analyzing the sensor data and applying control algorithms, the computer-controlled components can ensure efficient and accurate operation of the worm wheel system in accordance with the desired performance requirements.
  • Positioning and Motion Control: Computer-controlled components can enable advanced positioning and motion control capabilities in worm wheel systems. By integrating with the worm wheel, electronic components can precisely control the position and movement of the system. This is particularly useful in applications where precise positioning or synchronized motion is required, such as robotics, CNC machines, or automated systems. The computer-controlled components receive input commands, process them, and generate appropriate signals to control the worm wheel’s rotation and positioning.
  • Monitoring and Diagnostics: Electronic components can facilitate real-time monitoring and diagnostics of worm wheel systems. By continuously monitoring parameters such as temperature, vibration, or load, the computer-controlled components can detect any abnormalities or potential issues in the system. This allows for proactive maintenance or troubleshooting actions to be taken, minimizing downtime and optimizing the performance and lifespan of the worm wheel. Additionally, the computer-controlled components can generate diagnostic reports, log data, and provide visual or remote alerts for timely intervention.
  • Integration with Human-Machine Interfaces: Computer-controlled components can integrate with human-machine interfaces (HMIs) to provide a user-friendly and intuitive interface for interacting with the worm wheel systems. HMIs can include touchscreens, control panels, or software applications that allow operators or users to input commands, monitor system status, adjust parameters, and receive feedback. This integration enhances the usability, flexibility, and accessibility of worm wheel systems in various applications.
  • Networking and Communication: Computer-controlled components can be integrated into networked systems, allowing for communication and coordination with other devices or systems. This integration enables seamless integration of the worm wheel into larger automated systems, production lines, or interconnected machinery. Networking and communication capabilities facilitate data exchange, synchronization, and coordination, enhancing overall system performance and enabling advanced functionalities.

By integrating electronic or computer-controlled components with worm wheels, modern applications can benefit from enhanced control, precision, monitoring, and communication capabilities. These advancements enable optimized performance, improved efficiency, and increased reliability in various industries and sectors.

China wholesaler Table Lifting Bolt Model Flat Head Thread Jack Worm Gear Screw Mechanical Jack Screw Flange Jack with Motor  China wholesaler Table Lifting Bolt Model Flat Head Thread Jack Worm Gear Screw Mechanical Jack Screw Flange Jack with Motor
editor by CX 2024-03-18